Home Energy Report: How to Read Your Chart
The Heating and Cooling section of your energy report will help you get into the details of how your systems have run over the past month. You can see how...
Admin |
Support
Home Energy Report: How to Read Your Chart
-
Is it possible to see outside temperature and humidity on my thermostat?
Yes. When connected with an Outdoor Sensor, select thermostats and devices will display the outdoor temperature and humidity on the screen.
Admin |
-
Can I connect more than one Portable Comfort Control to a single Prestige IAQ Thermostat?
No. Each thermostat can only be controlled by one Portable Comfort Center. But you can connect up to 16 different thermostats to one Portable Comfort Center to easily control multiple...
Admin |
-
How many thermostats can one Portable Comfort Control manage?
One Portable Comfort Control can manage up to 16 thermostats. I am unsure of the voltage coming up to my thermostat. How do I find out? Answer: Honeywell offers thermostats...
Admin |
-
How Does the Portable Comfort Control Work?
The Portable Comfort Control allows you to control the system status (i.e. heat off or cool and the temperature settings for thermostat). If only one thermostat is connected, then you...
Admin |
-
How do I determine whether the thermostat is calling for second stage of heating or cooling?
Press "Menu: followed by "Equipment Status". This shows the status of the heating and the cooling equipment and the number of stages engaged.
Admin |
-
Does this thermostat offer password protection?
Yes, the Prestige thermostat allows the owner to lock the screen with a password. To set a password on the thermostat: Press the menu tab. Scroll down to and select...
Admin |
-
What is the EM HT (Emergency Heat) switch position on my heat pump thermostat?
The EM HT (Emergency Heat) feature allows the user to use a backup heat source when the heat pump is not working. The Emergency Heat feature locks out the heat...
Admin |
-
What is the difference between "Aux Ht" and "Em Ht"?
Aux Ht or Auxiliary heat is the backup heat that turns on to help the compressor for first stage maintain your temperature setting. You know if the auxiliary heat is...
Admin |
-
My thermostat shows humidity however I am unable to change it?
If the VisionPRO Thermostat does not allow you to change the humidity settings, then it is not setup for dehumidification or humidification control. In this case Honeywell recommends speaking to...
Admin |
-
What if my HE360 or HE365 Humidifier is not delivering enough humidification?
There are a variety of factors that can affect the level of humidification that can be achieved. The first consideration must be to proper sizing of the humidifier. Please verify...
Admin |
-
Is it possible to see outside temperature and humidity on my thermostat?
Yes. When connected with an Outdoor Sensor, select thermostats and devices will display the outdoor temperature and humidity on the screen
Admin |
-
Honeywell Humidifier Maintenance
Before checking/cleaning your humidifier system, make sure it is powered down for safety. We do not recommend servicing a powered humidifier. Access and remove your humidifier pad to inspect if...
Admin |
-
No water is going across my humidifier pad. What could cause this?
Before attempting any self-service power down your humidifier. Check your water supply line for cracks or obstructions (you may have to turn off you water supply to the humidifier if...
Admin |