Home Energy Report: How to Read Your Chart
The Heating and Cooling section of your energy report will help you get into the details of how your systems have run over the past month. You can see how...
Admin |
The Heating and Cooling section of your energy report will help you get into the details of how your systems have run over the past month. You can see how...
Admin |
If you activate a button on the doorbell just as you plug in to your PC, the drive might not be recognized. Do not press any key for five seconds...
Admin |
If the timer 3W wire is on a separate connector when on a single pole installation (Not having voltage at all on it) or connected as a 3W installation but...
Admin |
The doorbell beeps twice to notify that the doorbell push battery is low and needs to be replaced.
Admin |
It probably means that the compressor is not turning on. Here's how to fix that: 1. Verify that the set point is below the indoor temperature. 2. Verify the "snow...
Admin |
Check your wiring to see if you have a C-wire. If you do not see a wire in the C terminal, refer to your Installation Guide / C-Wire Adaptor Guide...
Admin |
Some of the 9000 series thermostats (RTH9585WF, THX9421R, TH9320WF) are displaying 'sensor error' when placed in low humidity installation locations. If the thermostat spent time in a low humidity environment,...
Admin |
Ensure you are logging in / using the correct account. Each device can only be registered to a single account. If your device is registered to another user, request the...
Admin |
Trouble connecting? If you are unable to complete the WiFi connection process, attempt the following before proceeding: Attempt to connect and register the thermostat to a mobile hotspot. This allows...
Admin |
Your Timer might be locked, this only applies for models TI073, PLS550 and PLS551.
Admin |
If your commands are not responding, it means there is a disconnect between the app and Apple HomeKit. To resolve this use the following steps: Go into Settings on your...
Admin |
A secondary security code is prompted for added security within the Lyric App. ?This is designed to avoid home intrusion risks via camera or thermostat access from an unauthorized user.
Admin |
This message means the Resideo App is unable to connect to the Honeywell Home servers. This may be due to an internet connection issue, a server issue, or an issue...
Admin |
Contact customer care. https://www.resideo.com/us/en/support/ and they will assist you.
Admin |