What is a changeover valve on a heat pump?
The changeover valve is a device which reverses the flow of refrigerant in the heat pump. This will allow the freon to reverse and heat the home or cool the...
Admin |
The changeover valve is a device which reverses the flow of refrigerant in the heat pump. This will allow the freon to reverse and heat the home or cool the...
Admin |
Use the following steps to connect your thermostat to Apple HomeKit: Check the model number of your thermostat to make sure it is HomeKit-enabled. Check the wiring of your thermostat....
Admin |
The thermostat operates between 20-30 VAC, ""supplied"" to the R/RC terminals and ""returning"" through the C terminal. A C wire, connected to C on the equipment, is required for the...
Admin |
The thermostat operates between 20-30 VAC, "supplied" to the R/RC terminals and "returning" through the C terminal. A C wire, connected to C on the equipment, is required for the...
Admin |
You can easily control the Lyric thermostat, as well as other smart home devices, from the Lyric Controller interface. Automate smart scenes for energy savings, comfort and security while managing...
Admin |
When first installed and or placed back on the wall, the Lyric thermostat's display should light up in a circle as it starts up and charges. This will take up...
Admin |
If your doorbell isn't working, try the following steps: 1. Check batteries in the doorbell. 2. Check the batteries in the push button. 3. Check the device pairing.
Admin |
This loud noise will happen if you stand too close to the Lyric C1 camera, as the 2-way talk can create an echo. What's happening is that the voice from...
Admin |
If the thermostat displays a strike-through WiFi icon on its screen or shows up as offline on the Lyric app, it has lost connection to the network. Make sure the...
Admin |
Your home is a lot like your body - it needs to stay properly hydrated in order to maintain the comfort of those living in it. Air that's too dry...
Admin |
Check your jumper loop. If you have a wire in the RC terminal and no wire in the R terminal, insert the jumper loop. If you have a wire in...
Admin |
Your thermostat is equipped with the Smart Response Technology feature, which allows the thermostat to "learn" how long it takes to reach a desired setpoint and begin heating or cooling...
Admin |
RECONNECTING A THERMOSTAT TO A WIFI NETWORK If your device was previously connected, please remove the face plate from the wall plate for 30 seconds and then reconnect it. After...
Admin |
The thermostat operates between 20-30 VAC, "supplied" to the R/RC terminals and "returning" through the C terminal. A C wire, connected to C on the equipment, is required for the...
Admin |