Home Energy Report: How to Read Your Chart
The Heating and Cooling section of your energy report will help you get into the details of how your systems have run over the past month. You can see how...
Admin |
The Heating and Cooling section of your energy report will help you get into the details of how your systems have run over the past month. You can see how...
Admin |
Remove the thermostat from the sub base. If the sub base is securely connected to the wall, the face plate will disconnect if pulled straight out from the wall. Remove...
Admin |
Push down on the release button on the side of the terminal. While holding the button down, gently pull the wire out.
Admin |
Press up or down to immediately adjust the temperature and then press the HOLD button. The thermostat will hold this temperature until the HOLD button is pressed again.
Admin |
Any device which connects to Honeywell Home (T5, T6, T9, T10, WiFi Water Leak Detector, D6, C1, Round Smart, or Smart Home Security) will register to your account automatically once...
Admin |
Once connected and registered to your account, your device(s) will maintain a Wi-Fi connection to your network. They will automatically attempt to reconnect to your network if the connection is...
Admin |
Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. Press up or down to set your weekday Wake time (Mon–Fri), then press NEXT. Press up or down to set the temperature for this...
Admin |
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold...
Admin |
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold...
Admin |
To Set your schedule: 1. Press Menu button to enter menu settings. 2. Press < or > to cycle through to Schedule. 3. Press Select to cycle through System Setup....
Admin |
Make sure the thermostat is set to the system you want to program (Heat or Cool). Press SET until Set Schedule is displayed. Press up or down to set your...
Admin |
To Set your schedule: Touch MENU on the thermostat display, select SCHEDULE Each Day / Period will be displayed. Touch SELECT to edit each period. Touch the TIME displayed and...
Admin |
Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. Press up or down to set your weekday Wake time (Mon–Fri), then press NEXT. Press up or down to set the temperature for this...
Admin |