Home Energy Report: How to Read Your Chart
The Heating and Cooling section of your energy report will help you get into the details of how your systems have run over the past month. You can see how...
Admin |
Support
Home Energy Report: How to Read Your Chart
-
How to Mount a Lyric Thermostat on the Wall
To mount your Lyric on the wall, first remove your old thermostat from the wall and ensure that you have recorded your current wiring configuration. You can find directions for...
Admin |
-
How do I remove the wires from my old thermostat?
Thermostats come with many different wiring methods. Most often, the wires will be held in place with a small screw. You may find it helpful to have a small Phillips...
Admin |
-
How do I remove the wires from my Lyric thermostat?
The Lyric thermostat has push in wiring terminals. To remove a wire from its wiring terminal, push down very gently on the terminal tab with a ballpoint pen or small...
Admin |
-
I just installed my Lyric thermostat and turned my power back on, but my Lyric is not starting up?
When first installed, your Lyric's display should light up in a circle as it starts up and charges. This will take up to 3 minutes. My Lyric's display is not...
Admin |
-
How do I recycle my mercury thermostat?
The easy way to dispose of mercury thermostats. Visit http://www.thermostat-recycle.org today.
Admin |
-
Do I turn off the switch labeled Furnace or the switch labeled Air Conditioning on my circuit breaker?
To be certain you have cut power to your thermostat, switch both circuit breakers to off. Then, confirm that the power is off by increasing or decreasing the temperature on...
Admin |
-
Honeywell Lyric Fan Settings
Yes, you can control your fan in three different ways. On: The fan will run continuously. Use this setting for improved air circulation or for more efficient central air cleaning....
Admin |
-
How do I choose how many cycles per hour I need?
Cycles per hour (cycle rate) is a measure of how many times per hour your heating or cooling system will turn on and off. You do not need to select...
Admin |
-
How do I enable Apple? HomeKit? with my Lyric Thermostat?
In order to use your Lyric Thermostat with Siri or Apple HomeKit apps, you will need to have a second generation Lyric Round WiFi Thermostat and use a C wire....
Admin |
-
Why am I getting an iCloud Settings error?
An iCloud Settings error means the Lyric mobile device is having trouble connecting with Apple® HomeKit™. Try verifying your iCloud settings and your Lyric app permissions. Update the iOS software...
Admin |
-
How do I set up geofencing with my Lyric?
If you are installing and configuring your Lyric for the first time, your app will walk through a step-by-step guide as the final chapter of installation. This occurs after you've...
Admin |
-
How do I change my geofencing settings in my Lyric thermostat?
CAUTION: Changing the geofence on your device will update the settings for all authorized users. You can configure or change your geofence at any time. To Change the Center of...
Admin |
-
Why didn't my Lyric's geofence trigger when I crossed the boundary?
The Lyric app uses your smartphone's location services to know when you cross the geofence boundary. If your phone has any connection issues or interrupted data services at that moment,...
Admin |