*When configuring your thermostat, it is important to configure it correctly for your system type. Incorrectly configuring your thermostat can lead to inefficient operation and in extreme cases, damage to your system*
When first installed, the thermostat can be configured from the Main Screen or via the setup and connection with the Honeywell Home App. The thermostat can be reconfigured any time via the Installer Setup. Use the link below for the complete Installer Setup
Configuring during initial setup:
Once powered, the thermostat will display “START SETUP” Touch the screen to continue.
You will next be prompted to setup the thermostat with or without the mobile app. Select NO to continue setup without using the Honeywell Home app. Select YES to continue setup using the Honeywell Home app. (Setup and Configuration using the Honeywell Home App can be found under the WiFi and Connectivity support article)
Setup without the Honeywell Home App:
Use the < and > buttons to navigate the menu. Touch EDIT to modify each setting. When Finish Setup is displayed, Touch SELECT to save the settings.
After Saving the configuration settings, you will be prompted to connect to Wi-Fi. If you Opt out of connecting to Wi-Fi, you will be prompted to enter the time and date. You will then be able to operate your thermostat manually.
Reconfiguring your thermostat:
At any time, the configuration of your thermostat can be modified from the Installer Setup Menu.
Touch and hold the MENU button on the thermostat display. When DEVICE SETUP is displayed, touch SELECT. Use the < and > buttons to navigate the menu. Touch EDIT to modify each setting. When Finish Setup is displayed, Touch SELECT to save the settings.